Metra 99-8161S 1 or 2 DIN Dash Kit + Interface for 2002-10 Lexus SC430

by Metra
Out of Stock
$94.95
Checked 30-Day Money-Back Guarantee 
Checked Fast, Free Shipping on all US Orders
Checked Live Customer Service Representative
Checked Buy Online, Free Local Pickup (Contact us for Availability)
Dash Kit
ISO Single DIN radio provision with pocket (without factory door)
Double DIN radio provision (without factory door)
Double DIN radio provision (with factory door)
Painted silver
Authorized Dealer

Interface

Designed to allow the user to replace the factory radio with an aftermarket radio and retain the use of the factory amplified sound system
Provides accessory power (12-volt 10-amp)
Used in amplified systems
High level speaker input
USB updatable
Retains balance and fade
Authorized Dealer

Installation Instructions for Part 99-8161S.pdf
Installation Instructions for Part TYTO-01.pdf

Note: This Installation Kit DOES NOT come with a Chime Interface, because these are built into the factory radio and you will lose the warning chimes. Also this Harness will NOT retain OnStar if equipped. It DOES NOT work with vehicles that have a premium Bose factory sound system. This Dash Kit will work with standard Single or Double DIN stereos.

Please check compatibility to make sure this works with your vehicle if you have any question don't hesitate to contact us for more info.
Compatible With
Lexus SC430 2002-2010

Tools Needed (sold separately)
Panel removal tool
Phillips screwdriver
Socket wrench
Cutting tool
Crimping tool
Tape
Connectors (example: butt-connectors, bell caps, etc.)

Note: This Installation Kit DOES NOT come with a Chime Interface, because these are built into the factory radio and you will lose the warning chimes. Also this Harness will NOT retain OnStar if equipped. It DOES NOT work with vehicles that have a premium Bose factory sound system. This Dash Kit will work with standard Single or Double DIN stereos.

Please check compatibility to make sure this works with your vehicle if you have any question don't hesitate to contact us for more info.
Radio trim panel for use with factory door
Radio trim panel for use without factory door
Brackets
Pocket
(8) #8 x 3/8" Phillips pan-head screws
TYTO-01 interface or similar
16-pin harness with stripped leads
14-pin to 20-pin harness with stripped leads