Metra 99-6526BZ Bronze Double DIN Dash Kit for Select Jeep Cherokee

Metra 99-6526BZ Bronze Double DIN Dash Kit for Select Jeep Cherokee

• ISO Double DIN radio provision
  
• Painted scratch-resistant matte black with bronze trim 
  
• Mechanically designed for a two-tone paint scheme to properly match the factory bronze color
  
• Intended for installation of Double DIN radios with a backup camera input
  
• Provides accessory power (12-volt 10-amp)
  
• Retains R.A.P. (retained accessory power)
  
• Retains the factory personalization menu and climate controls status
  
• Can be used in amplified or non-amplified models
  
• Provides NAV outputs (parking brake, reverse, and speed sense)
  
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
  
• High level speaker input
  
• Retains balance and fade
  
• Ability to add aftermarket backup camera and additional video input
  
• Retains factory screen
  
• Micro "B" USB updatable
  
• Compatible with 2014-up Jeep Cherokee Latitude/Limited Vehicles
  Includes (1) One Radio trim panel, (2) Two Radio brackets, (4) Four #8 x 3/8"
• Phillips screws, (1) One Axxess Interface, (1) One 18-pin Harness with stripped leads, (1) One 6526 Harness, (1) One 4-pin Harness with stripped leads and (1)
• One Installation Instructions
  
• Panel removal tool, 10mm socket wrench, Torx T-15 screwdriver, Phillips screwdriver, Phillips screwdriver (short stubby version), Cutting tool, Crimping tool,
• Tape and Connectors (example: butt-connectors, bell caps, etc.) Tools Needed (sold separately)
  
• Authorized Dealer

Note: The rear-view camera Input is used to display the climate control status and personalization menu. If the aftermarket radio does not have a screen with a rear-view camera Input, then there will be no visualization of the climate controls status and personalization menu, which makes adjusting the climate control impossible. An externally mounted screen could be substituted in this situation.