- Description
- Specs/Features
- What's in the Box
- FAQ
- Proposition 65
ISO DIN head unit provision
Double DIN head unit provision (Excluding 2005-2008 Matrix)
Stacked ISO DIN head unit provision (Excluding 2005-2008 Matrix)
Will accommodate a full recessed Single DIN unit with a pocket
Fits an ISO mount unit with a pocket using Meta Snap In ISO radio supports
Will mount two stacked ISO units
Can be used to install a double DIN unit
Authorized Dealer
Compatible With
Toyota Matrix 2005-2008
Tools Needed (sold separately)
Phillips screwdriver
Socket wrench
Cutting tool
Kit Components
Double DIN Faceplate (excluding 2005-2008 matrix)
ISO DIN Faceplate (excluding 2005-2008 matrix)
ISO DIN Faceplate 2005-2008 Matrix
Mounting Brackets
ISO Trim Plate
ISO Brackets
ISO Spacers
Rear Support
(4) #6 x 1/4" Phillip Screws
(4) #8 x 3/8" Phillip Screws
70-1761 Wire Harness or similar
40-GM10 Factory Antenna Connector or similar
Note: This Installation Kit DOES NOT come with a Chime Interface, because these are built into the factory radio and you will lose the warning chimes. Also this Harness will NOT retain OnStar if equipped. It DOES NOT work with vehicles that have a premium Bose factory sound system. This Dash Kit will work with standard Single or Double DIN stereos.
Please check compatibility to make sure this works with your vehicle if you have any question don't hesitate to contact us for more info.
Compatible With
Toyota Matrix 2005-2008
Tools Needed (sold separately)
Phillips screwdriver
Socket wrench
Cutting tool
Note: This Installation Kit DOES NOT come with a Chime Interface, because these are built into the factory radio and you will lose the warning chimes. Also this Harness will NOT retain OnStar if equipped. It DOES NOT work with vehicles that have a premium Bose factory sound system. This Dash Kit will work with standard Single or Double DIN stereos.
Please check compatibility to make sure this works with your vehicle if you have any question don't hesitate to contact us for more info.
Double DIN Faceplate (excluding 2005-2008 matrix)
ISO DIN Faceplate (excluding 2005-2008 matrix)
ISO DIN Faceplate 2005-2008 Matrix
Pocket
Mounting Brackets
ISO Trim Plate
ISO Brackets
ISO Spacers
Rear Support
(4) #6 x 1/4" Phillip Screws
(4) #8 x 3/8" Phillip Screws
70-1761 Wire Harness or similar
40-GM10 Factory Antenna Connector or similar
What is Proposition 65?
California’s Proposition 65 protects California consumers by requiring special warnings for products that contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm where those products would expose consumers to such chemicals above certain threshold levels.
If a product description on this site directed you to this page, the warning for this item is:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Who is this message intended for?
Customers with a California billing or ship to address.
Why are you seeing the message now?
California implemented new guidelines for Proposition 65 warnings, effective August 30, 2018. These guidelines were applied to make the warnings more clear and reasonable.
Where can you get more information about Proposition 65?
Learn more from the California Office of Environmental Health Hazard Assessment (OEHHA) site here.